Gas Technician G2 License Study Guide Rated A+

A _______ must be installed between 2 Shut Off Valves in a Propane System: {Ans: Hydrostatic Relief Valve}When the Voltage has been determine to be approximately 120 volts, which scale on an analog meter should be selected for most accuracy? {Ans: 0-250 Volts}The Branch Fuse Size is determined by: {Ans: The Wire Size}The normal fuse for a #14 AWG copper Conductor is: {Ans: 15 Amps}A Hot Surface Igniter requires how many volts to operate properly ? {Ans: 115 to 125 VAC}The Residential Water Heater, the ECO is set to operate at: {Ans: 200 degrees Fahrenheit}When a Gas Fired Appliance is vented into a chimney flue serving an appliance which burns a solid fuel in a Commercial or Industrial application, How shall the Vent from the Gas Appliance be installed? {Ans: Through a separate Flue opening above the Flue Pipe connection from the other appliance}The Clearance to Combustible Appliance required for a Free Standing Room Heater is: {Ans: 36" Inches}Convection is: {Ans: Heat transfer through Fluids}A tank of Propane shall have a Maximum Allowable Working Pressure (MAWP) of not less than {Ans: 250 PSIG}The maximum pressure loss between the termination of