Nace Cip 1 Cbt Exam Practice Questions - Questions & Solutions

When an Inorganic Zinc Rich primer is applied too heavily a common result is? {Ans: Mud Cracking}The primary function of the coating inspector is? {Ans: Specification compliance.}Excess moisture during holiday testing can cause erroneous by creating a path across the surface of the coating to pinholes previously detected, or directly to the signal return connection. This is often referred to as? {Ans: Telegraphing}Corrosion occurring uniformly across a surface is called? {Ans: General Corrosion}A decrease in temperature will generally cause the corrosrion rate to? {Ans: Decrease}Water borne latex coatings cure by a process known as? {Ans: Coalescence}Mill scale is typically removed for which of the following reasons? {Ans: To avoid future delimitation, To approve coating adhesion, and To eliminate a source of galvanic corrosion.}The contractor is strongly recommended but not required to perform this action: {Ans: Should}NACE Level 1 Inspectors have been trained to perform: {Ans: Visual inspection and non destructive testing.}SSPC Technology Guide No. 12 states coating inspection requires a minimum of which of the following? {Ans: 50 foot candles (538 lumens)}Failure of a plural component to cure is frequently caused by? {Ans: Wrong mix ratio(metering)}The most important factor