Abyc Electrical 2 Already Passed

D {Ans: Excessive electrical resistance can be caused by _____________. A. Oversized conductors, loose terminals, and corrosion B. improper wire insulation and excessive wire strand C. Fuses with too high of a rating and watt to low D. Undersized wire, loose connections, and corrosion}B {Ans: When the decision is made to abandon old wiring, the tech should A. Replace with new wire B. Fold back, insulate and label the ends of the old wire C. Splice in line with new wires}c {Ans: A customer complains about a revers polarity problem. All of the following are likely causes of the problem except: A. Improperly wired shore power cord B. Improperly wired shore power inept recepticals C. An open neutral D. Reversal of the hot and neutral conductors in the AC panel feeder cable}C {Ans: Tech A says that voltage supplied to the rotor controls alternator output voltage. Tech B says that the alternator output is proportionate to rotor voltage. Which tech is correct? A. Tech A B. Tech B C. Both techs D. Neither}C {Ans: a typical 9.9 hp outboard Benin measures out at approximately _______ pounds of thrust. a. 110 b. 150 c.115 d. 116}B