Iicl Container Inspector's Exam Questions With Correct Answers

Tape remaining on interior surfaces that would not be acceptable for shipment of cargo. {Ans: Reefer = Scrape/spot clean}Assuming owner and environmental regulations permit, which of the following procedures is NOT recommended for repairing tarpaulins or open top containers? A. Cleaning the area to be covered with acetone or mineral spirit B. Using a heat gun to fuse a patch to the tarpaulin C. Sewing on a patch of the same material as the tarpaulin D. Repairing a 6 mm (1/4 in ) pin hole with an epoxy compound {Ans: C. Sewing on a patch of the same material as the tarpaulin}Organic residue (EX: coffee beans) remaining inside container. ALL organic materials inside the container must be removed. {Ans: DV = Scrape/sweep // OT = Scrape/sweep}Inserts must be fitted flush with the existing component and should be fabricated to allow no more than {Ans: 2 mm (5/64 in) clearance between adjoining surfaces}Fractures, cracks, cuts or tears in a component or a weld joining components can {Ans: be repaired by welding or a combination of straightening and welding; limitations: Maximum length of any crack fracture, cut or tear may be welded is 200mm (8 in) and