Kentucky Ust Certification Test Prep Already Passed

reinforcement of a steel underground tank may be required by the tank manufacturer if {Ans: the burial depth is greater than the tank diameter}after you remove any remaining product and expose the top of the tank what is your next step and disposing of the tank and place? {Ans: remove the drop tube the fill pipe that gauge pipe and the vapor recovery truck connection and submersible pumps and any other tank apparatuses. cap or remove all non product lines except for the vent lines}when a bottom hold down pad is used to mechanically anchor a steel underground tank...... {Ans: the tank and the pad should be separated by appropriate backfill material}when installing a bottom hold down pad what should be the proximity of the tank to the hold down pad? {Ans: an adequate bedding of backfill material must separate the tank and the pad.}in areas of impervious oils anchoring to prevent flotation might be required due to the bathtub effect caused by what? {Ans: infiltration of surface water into the tank backfill causing a locally high water table around the tank.}it is recommended that the installer provide a convenient means of venting Vapors trapped